MADE IN THE USA
Cradle Lifts
Reliability, Quiet Operation, and Low Maintenance
Introduced in 1980, our Cradle Lift is the most popular option for boaters looking to protect their investment.
Choose between marine grade aluminum or hot-dipped galvanized steel.
Select your weight capacity up to 45,000 pounds driven by our Premier Direct Drive or Flat Plate systems.
Long lasting floating pillowblock bearings quietly operate friction-free, even under heavy load conditions.
Consider ease-of-access options like a remote control system with a limit switch, or aluminum walkways and work platforms.
The Premier Direct Drive cradle lift system delivers protection and power while requiring very little maintenance. You'll be looking good and carefree thanks to this premier direct drive lift thats totally enclosed with precision gearing and oil bath.
| Capacity | No. of Motors | Motor Finish | Amps per 110v vs 220v | No. of Pilings | Alumninum Cradle Lower Beam Size | Carpeted #1 PT Boards |
|---|---|---|---|---|---|---|
| 7,000 | (2) 3/4 HP | Stainless | 26 - 13 | 4 | (2) 6" x 12' | 3" x 10" x 12' |
| 10,000 | (2) 3/4 HP | Stainless | 26 - 13 | 4 | (2) 8" x 12' 6" | 3" x 10" x 12' |
| 13,000 | (2) 1 HP | Stainless | 27.2 - 13.6 | 4 | (2) 8" x 12' 6" | 3" x 10" x 12' |
| 16,000 | (2) 1.5 HP | Stainless | 30.4 - 15.2 | 4 or 6 | (2) 10" x 15' | 3" x 10" x 14' |
| EXT 16,000 | (2) 1.5 HP | Stainless | 30.4 - 15.2 | 4 or 6 | (2) 10" x 15' | 3" x 12" x 16' |
| 20,000 | (2) 1.5 HP | Stainless | 30.4 - 15.2 | 4 or 6 | (2) 10" x 17' | DBL 3" x 12" x 16' |
| 20,000 | (4) 1 HP | Stainless | 220 V - 28 A | 8 | (2) 10" x 17' | DBL 3" x 12" x 16' |
| 25,000 | (4) 1.5 HP | Stainless | 220 V - 30.4 A | 8 | (2) 12" x 17' | DBL 3" x 12" x 16' |
- All welded design for strength and durability
- 6061-T6 marine grade aluminum
- CNC machined components
- Dual channel beam support with concealed pipe drive
- Self-aligning pillow block bearings with grease fittings
- Aluminum grooved cable winders
- Cable dead end brackets welded to both channel beams
- Channel spanner beams provides strength and rigidity to lower system
- Heavy duty adjustable pipe guides with pvc pipe and caps
- Adjustable chock system
- Carpeted #1 pressure treated 3" chock boards
- Stainless steel motors
- Aluminum totally enclosed premier direct drive oil bath gear reducer
- Stainless steel cable
- Stainless steel hardware
- Aluminum sheaves with 3/4" stainless steel bolts with grease fittings
- Individual switches for accurate leveling with weather resistant enclosures
- Quiet, dependable operation
- Easy installation and technical support
- Product liability coverage
- Comprehensive warranty
- High-Speed Gearboxes for improved speed in lifting and lowering (7,000lbs cap. @ 62 inches/per min.) (10,000lbs to 16,000lbs @ 31 inches/per min.)
- Radio motor control with hand-held transmitter
- Limit switch - set upper and lower stopping points
- Motor covers
- Plain cable winders
- Cable keepers, bolt-on
- Vinyl covered aluminum bunks (aluminum lifts only)
- Custom chocks: Riser, T-style, and Pontoon
- Aluminum walkway
- Aluminum work platform
- Aluminum step
- Aluminum boarding platform
- Aluminum tide guides
- Roof tabs
- Cantilever brackets
- Marina brackets
- Beam dimensions
- Piling spacing
- Support beams with roof tabs
- Cantilevered support beams
- Dual support beams (marina application)
- Angled lower beams
- Chock systems
The flat plate lift system provides an economical alternative and is made with the same care and attention-to-detail as Davit Master's other Boat Cradle Lifts.
| Capacity | No. of Motors | Motor Finish | Amps per 110v vs 220v | No. of Pilings | Aluminum Cradle Lower Beam Size | Carpeted #1 PT Boards |
|---|---|---|---|---|---|---|
| 7,000 | (2) 3/4 HP | Painted | 26.8 - 13.4 | 4 | (2) 6" x 12' | 3" x 10" x 12' |
| 10,000 | (2) 3/4 HP | Painted | 26.8 - 13.4 | 4 | (2) 8" x 12' 6" | 3" x 10" x 12' |
| 13,000 | (2) 3/4 HP | Painted | 26.8 - 13.4 | 4 | (2) 8" x 12' 6" | 3" x 10" x 12' |
- All welded design for strength and durability
- 6061-T6 marine grade aluminum
- CNC machined components
- Dual channel beam support with concealed pipe drive
- Self-aligning pillow block bearings with grease fittings
- Aluminum grooved cable winders
- Cable dead end brackets welded to both channel beams
- Channel spanner beams provides strength and rigidity to lower system
- Heavy duty adjustable pipe guides with pvc pipe and caps
- Adjustable chock system
- Carpeted #1 pressure treated 3" chock boards
- Stainless steel motors
- Aluminum totally enclosed premier direct drive oil bath gear reducer
- Stainless steel cable
- Stainless steel hardware
- Aluminum sheaves with 3/4" stainless steel bolts with grease fittings
- Individual switches for accurate leveling with weather resistant enclosures
- Quiet, dependable operation
- Easy installation and technical support
- Product liability coverage
- Comprehensive warranty
- Radio motor control with hand-held transmitter
- Limit switch - set upper and lower stopping points
- Faster motors
- Motor covers
- Plain cable winders
- Cable keepers, bolt-on
- Vinyl covered aluminum bunks (aluminum lifts only)
- Custom chocks: Riser, T-style, and Pontoon
- Aluminum walkway
- Aluminum work platform
- Aluminum step
- Aluminum boarding platform
- Aluminum tide guides
- Roof tabs
- Cantilever brackets
- Marina brackets
- Beam dimensions
- Piling spacing
- Support beams with roof tabs
- Cantilevered support beams
- Dual support beams (marina application)
- Angled lower beams
- Chock systems